DYNABOND Activator is an adhesive primer designed to work in conjunction with cyanoacrylate adhesives such as DYNABOND Super Adhesive. It “primes” or activates the adhesive to form a quick and permanent bond. It also ensures consistent curing each and every time.
In particular, the DYNABOND Activator 10 oz aerosol spray helps eliminate “surges” associated with pump spray products that can contribute to overlaps and missed spots, weakening the bond.
- Shelf life of over a year
- Contains no ozone-depleting compounds
- VOC Compliant CARB/OTC
- Will cure bonds between mesh and wooden or metal frames
- Available in
- 8 Ounce Pump Spray, 10 Ounce Can, 1 Quart Sizes
|SKUADH-D-ACTIVATOR-Q||DESCDYNABOND ACTIVATOR 1 QUART||U/MEA|
|SKUADH-D-ACTIVATOR-8 OZ||DESCDYNABOND ACTIVATOR 8 OZ PUMP SPRAY||U/MEA|
|SKUADH-D-AEROSOL ACTIVATOR-10 OZ||DESCDYNABOND AEROSOL ACTIVATOR 10 OZ SPRAY CAN||U/MEA|
|SKUADH-D-BOTTLE/PUMP TOP 8 OZ||DESCDYNABOND EMPTY 8OZ ACTIVATOR BOTTLE + PUMP TOP||U/MEA|
DYNABOND Super Adhesive is an easy to use cyanoacrylate adhesive system that binds virtually all types of mesh to any type of frame. It is available in a range of viscosities designed to work with a wide variety of mesh counts.
To use, simply stretch the mesh to the desired tension and apply DYNABOND Super Adhesive to the screen with the squeeze bottle, making a fine bead. Then, spread the adhesive evenly with a card, and optionally, apply an adhesive primer like DYNABOND Aerosol Activator. This will dry DYNABOND Super Adhesive within 20 seconds.
|Series||Viscosity (cP)1||Suggested Mesh Counts (/in)|
|5||5||200 - 508|
|150||100||60 - 355|
|300||300||30 - 305|
|600||600||15 - 180|
- Available in
- 16 Ounce Squeeze Bottle
- Please note that the viscosities of these products can increase slightly over time as they are stored. The values listed are approximations.[return]
|SKUADH-D-DYNA150-16 OZ||DESCDYNABOND 150 (100CP) ADHESIVE 16 OZ||U/MEA|
|SKUADH-D-150 GLUE KIT||DESCDYNABOND 150 GLUE KIT (INCLUDES 16 OZ ADHESIVE + 8 OZ ACTIVATOR + SPREADER)||U/MEA|
|SKUADH-D-DYNA300-16 OZ||DESCDYNABOND 300 (300CP) ADHESIVE 16 OZ||U/MEA|
|SKUADH-D-DYNA-5-16 OZ||DESCDYNABOND 5 (5CP) LOW VISCOSITY ADHESIVE 16 OZ BOTTLE||U/MEA|
|SKUADH-D-DYNA600-16OZ||DESCDYNABOND 600 (600CP) HIGH VISCOCITY ADHESIVE 16 OZ BOTTLE||U/MEA|
|SKUADH-D-600 GLUE KIT||DESCDYNABOND 600 GLUE KIT (INCLUDES 16 OZ ADHESIVE + 8 OZ ACTIVATOR + SPREADER)||U/MEA|
RBP 1200 is a water-soluble, non-hazardous priming accelerator. Adhesive primers, such as RBP 1200, are used to enhance and accelerate the cure speed of cyanoacrylate adhesives such as RhinoBond™. They permit fast, efficient bonds in a high speed production environment.
The cure mechanism is very simple. Adhesive is applied to one substrate and the primer is sprayed or brushed onto the other substrate. Curing occurs immediately when the two parts are joined.
- Available in
- 8 Ounce, 1 Gallon Size
|SKUADH-R-1200ACT-G||DESCRHINOTECH RBP 1200 WATER BASED ACTIVATOR 1 GALLON||U/MEA|
|SKUADH-R-1200ACT-8 OZ||DESCRHINOTECH RBP 1200 WATER BASED ACTIVATOR 8 OUNCE BOTTLE||U/MEA|